Sensors work alongside assets by attaching them onto the physical assets such as waste bins and pulling all the required data into the MCS platform.
To make the waste collection process simpler and smarter with automation, users can attach this small sensor device to the asset such as a litter bin. The device sends all the details such as precise location, status of the asset whether it’s empty or full, an alert such as a fire,etc direct to the MCS platform. This allows the authorities to plan the collection of the waste only when it is necessary thus preventing unnecessary rounds, an alert relating to any issue with the asset is also detected by the sensor.
Once the tracker sensor is installed and configured with a SIM, the device can be installed to the Asset.
Please ensure the following steps are covered-
Input the SIM card details
Add configuration details for the sensor
Assign tracker to the Asset (New or Existing)
Input the SIM card details
The user needs to add the SIM card details which will be inserted inside the tracker device and used for network purpose for exchange of data.
Go to Administration -> Tracker -> SIM
A list of already added SIM cards is displayed on this page.
You can add one or multiple SIM cards details or import via CSV file.
Add configuration details for the asset sensor
Once the card is added, then the user needs to add and configure the sensor device in the system.
Go to Administration -> Tracker -> Device
The list of already added tracker devices is displayed here.
You can search for the device based on assets to which it is assigned or phone number.
You can add one or multiple sensor devices or import via CSV file.
You can choose to assign this tracker to the asset while adding the sensor or later from the asset page
Assign tracker to the Asset (New or Existing)
It is necessary to have a sensor specific new category for assets for any new assets with this feature.
Go to Administration –> Assets -> Category -> Add new
Enter the details as necessary.
Select ‘Yes’ to choose that this category of assets is trackable and save it.
The tracker devices can be assigned to the assets created under this specific category.
Create a new asset of the tracker category as created above.
It will display an additional field ‘IMEI’ under ‘Tracker region’ to select the tracker device and assign it to the asset as mapped against the IMEI.
To view all the assets under this category you can tick the tracker filter option.
On the Asset detail page, navigate to the region called ‘Tracker’ to view all the details fetched from the tracker device attached to the asset.
The region will display details like – IMEI number, SIM number, along with device information like status of the asset, temperature, voltage, last location, date, fire status, etc. as shown below.
Click on the eye icon to view the history of the tracker that will display all the historic locations including the latitude and longitude of that device
Click on the map view to see the last location of the tracker device on the map.
Map view (Please note that the image below has no location)
You can also assign tracker device to the asset from right-side menu -> Tracker option
You can add or update the asset tracker details against assets which are created under the tracking-enabled category.
Click on the tracker tab in the sidebar menu.
Select the tracking device in the pop-up window and click on Add button.
Analytics
Go to Analytics -> asset trackers to view all the tracker devices on a map.
The filter options will be available as required.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article